Français
Italiano
Español
Deutsch
SET-UP AND MONITORING VIA THE HIBOOST APP
The signal booster is powered by a free cloud-based HiBoost App, Signal Supervisor. Control your device directly from your phone or tablet at anytime from anywhere and benefit from much easier and more efficient installation.
Find the best position for the outdoor antenna with a professional signal meter tool
Keep informed on booster performance status thanks to push notifications
Receive assistance online from competent tech experts
DOWNLOAD SIGNAL SUPERVISOR APP FROM GOOGLE PLAY AND APP STORE.
WHAT STANDARD KIT INCLUDES
Every HiBoost solution comes in a kit with the necessary installation components. HiBoost Hi23-6S-Plus standard kit includes:
- mobile signal booster
- outdoor directional antenna
- 50ft (15.2 m) HiBoost 300 cable
- 12V/ 7A, AC/DC power supply
EXTEND YOUR COVERAGE
It’s easy to customize a boosting solution according to your needs. You can add up to 8 extra indoor panel or omni antennas (view Optional Kits) to this PRO series repeater and greatly increase its coverage up to 5500 sq.m.
Standard Kit + 1 Panel PRO/ Omni PRO Kit
Coverage up to 2000 sq.m.
Standard Kit + 2 Panel PRO/ Omni PRO Kits
Coverage up to 2500 sq.m.
Standard Kit + up to 8 Panel PRO/ Omni PRO Kits
Coverage up to 5500 sq.m
POWERFUL NETWORK PROTECTION
No worries, all HiBoost signal repeaters are enabled with smart software that guarantees overall network protection even in the hardest signal reception conditions.
AUTOMATIC GAIN CONTROL (AGC)
The booster optimizes its performance according to the outdoor signal strength in your area. If the signal is too strong, the power of signal amplification automatically gets down. This completely avoids the interference with your operator’s network and saves the booster from overload.
SELF-OSCILLATION DETECTION
Self-oscillation can occur when the booster and antenna are installed too close to each other. The booster automatically detects the problem and reduces booster gain to fix the problem.
FULLY CERTIFIED PRODUCT
Quality proved by the compliance with the international and EU health and safety regulations (CE RED 2014/53/EU, RoHS, ISO 9001:2023)
HOW IT WORKS
1. The outdoor antenna picks up the signal from the nearest cell tower and sends it to the booster.
2. The booster amplifies or literally repeats the signal and transmits it to the indoor antenna.
3. The indoor antenna spreads the enhanced signal throughout the desired area.
4. This is the moment! Your mobile phone receives a strong signal and you enjoy seamless calls and data!
TECH SPECS
| Working Bands | 700, 800, 900, 1800, 2100, 2600 MHz |
|---|---|
| UL Frequency Range | 703-733 / 832-862 / 880-915 / 1710-1785 / 1920-1980 / 2500-2570 |
| DL Frequency Range | 758-788 / 791-821 / 925-960 / 1805-1880 / 2110-2170 / 2620-2690 |
| Supported Standards | NR700, EGSM, WCDMA, DCS, LTE800 and LTE2600 |
| V.S.W.R | Typical≤2 |
| Maximum Gain | 75 db |
| MGC (Step Attenuation) | ≥ 31 db/ 1 db step |
| Intelligent AGC | ALC ≥42dB |
| Gain Flatness | Typical≤5dB (p-p) |
| Noise Figure @ Max. System Gain | Typical≤5dB |
| Group Delay | ≤1μs |
| Frequency Stability | ≤0.01ppm |
| Power Supply | Input AC 100~264 V, 50/60 Hz, Output DC 12V/7A |
| Power Consumption | ≤30W |
| Impedance | 50 ohm |
| LCD Display | Frequency, Gain, Output Power and Working Status |
| I/O port | N-Female |
| Dimensions | 220*310*55 mm/ 8.7*12.2*2.2 inch |
| Booster Weight | 3.8 KG |
| Booster Kit Weight | 5.63 KG |
| Operating Temperature | -10ºC~+55ºC |
| Storage Temperature | -10ºC~+80ºC |
| Relative Humidity | 5% – 95% |
| Barometric Pressure | 55 kPa -106 kPa |
| Environment Condition | IP40 |
Reviews
There are no reviews yet.