Français
Italiano
Español
Deutsch
SET-UP AND MONITORING VIA THE HIBOOST APP
HiBoost signal booster is powered by a free cloud-based HiBoost App, Signal Supervisor. Thanks to it you can control your device directly from your phone or tablet at anytime from anywhere and benefit from much easier and more efficient installation via an online guide.
Go through all intsallation steps via an app and find the best position for the outdoor antenna easily with a professional signal meter tool
Keep informed on booster performance status thanks to push notifications
Share your device with competent tech experts and receive assistance online
DOWNLOAD SIGNAL SUPERVISOR APP FROM GOOGLE PLAY AND APP STORE.
WHAT STANDARD KIT INCLUDES
Every HiBoost solution comes in a kit with the necessary installation components. HiBoost Hi23-3S standard kit includes:
- mobile signal booster
- outdoor directional antenna
- 50ft (15.2 m) HiBoost 300 cable
- 12V/ 7A, AC/DC power supply
EXTEND YOUR COVERAGE
It’s easy to customize a boosting solution according to your needs. You can add up to 8 extra indoor panel or omni antennas (view Optional Kits) to a PRO series repeater and greatly increase its coverage up to 5500 sq.m.
Standard Kit + 1 Panel PRO/ Omni PRO Kit
Coverage up to 2000 sq.m.
Standard Kit + 2 Panel PRO/ Omni PRO Kits
Coverage up to 2500 sq.m.
Standard Kit + up to 8 Panel PRO/ Omni PRO Kits
Coverage up to 5500 sq.m
POWERFUL NETWORK PROTECTION
All HiBoost signal repeaters are enabled with smart functions by default. They guarantees blanket network protection even in the hardest signal reception conditions.
AUTOMATIC GAIN CONTROL (AGC)
The booster optimizes its performance according to the outdoor signal strength in your area. If the signal is too strong, the power of signal amplification automatically gets down. This completely avoids the interference with your operator’s network and saves the booster from overload.
SELF-OSCILLATION DETECTION
Self-oscillation can occur when the booster and antenna are installed too close to each other. The booster automatically detects the problem and reduces booster gain to fix the problem.
FULLY CERTIFIED PRODUCT
HiBoost products are of high quality standard which is proved by the compliance with the international and EU health and safety regulations (CE RED 2014/53/EU, RoHS, ISO 9001:2023)
HOW IT WORKS
1. The outdoor antenna picks up the signal from the nearest cell tower and sends it to the booster.
2. The booster amplifies or literally repeats the signal and transmits it to the indoor antenna.
3. The indoor antenna spreads the enhanced signal throughout the desired area.
4. This is the moment! Your mobile phone receives a strong signal and you enjoy seamless calls and data!
TECH SPECS
| Working Bands | 900, 1800, 2100 MHz |
|---|---|
| UL Frequency Range | 880-915 /1710-1785 /1920-1980 MHz |
| DL Frequency Range | 925-960 /1805-1880 /2110-2170 MHz |
| Supported Standards | EGSM, DCS, WCDMA |
| V.S.W.R | Typical≤2 |
| Maximum Gain | 75 db |
| MAX. OUTPUT POWER | 23dBm |
| MGC (Step Attenuation) | ≥ 31 db/ 1 db step |
| Intelligent AGC | ALC ≥42dB |
| Gain Flatness | Typical≤5dB (p-p) |
| Noise Figure @ Max. System Gain | Typical≤5dB |
| Group Delay | ≤1μs |
| Frequency Stability | ≤0.01ppm |
| Power Supply | Input AC 100~264 V, 50/60 Hz, Output DC 12V/7A |
| Power Consumption | ≤24W |
| Impedance | 50 ohm |
| LCD Display | Frequency, Gain, Output Power, ALC, ISO indicators |
| I/O port | N-Female |
| Dimensions | 220*280*55 mm/ 8.7*11*2.2 inch |
| Booster Weight | 3.6 KG |
| Booster Kit Weight | 5.33 kg |
| Operating Temperature | -10ºC~+55ºC |
| Storage Temperature | -10ºC~+80ºC |
| Relative Humidity | 5% – 95% |
| Barometric Pressure | 55 kPa -106 kPa |
| Environment Condition | IP40 |
Reviews
There are no reviews yet.