SET-UP AND MONITORING VIA THE HIBOOST APP
HiBoost is powered by a free HiBoost App, Signal Supervisor. Now you can control your device directly from your phone or tablet at anytime from anywhere and benefit from much easier and more efficient installation.
Go through all installation steps with a comprehensive guide and find the best position for the outdoor antenna with a professional signal meter tool
Keep informed on booster performance status thanks to push notifications
Receive assistance online from competent tech experts
POWERFUL NETWORK PROTECTION
All HiBoost signal repeaters feature smart AGC function that guarantees smart auto setup according to the level of outdoor signal reception and protection of your operator’s network.
AUTOMATIC GAIN CONTROL (AGC)
The booster optimizes its performance according to the outdoor signal strength in your area. If the signal is too strong, the power of signal amplification automatically gets down. This completely avoids the interference with your operator’s network and saves the booster from overload.
SELF-OSCILLATION DETECTION
Self-oscillation can occur when the booster and antenna are installed too close to each other. The booster automatically detects the problem and reduces booster gain to fix the problem.
HOW IT WORKS
1. The outdoor antenna picks up the signal from the nearest cell tower and sends it to the booster.
2. The booster amplifies or literally repeats the signal and transmits it to the indoor antenna.
3. The indoor antenna spreads the enhanced the signal throughout the desired area.
4. This is the moment! Your mobile phone receives a strong signal and you enjoy seamless calls and data!
TECH SPECS
Bandes de travail | 800, 900, 1800, 2100, 2600 MHz |
---|---|
Gamme de fréquences UL | 832-862 / 880-915 / 1710-1785 / 1920-1980 / 2500-2570 |
Gamme de fréquences DL | 791-821 / 925-960 / 1805-1880 / 2110-2170 / 2620-2690 |
Normes prises en charge | EGSM, WCDMA, DCS, LTE800 and LTE2600 |
Gain maximal | Uplink 55 dB, Downlink 60 dB |
Max. Puissance de sortie | Uplink 16 dB, Downlink 10 dB |
MGC (Atténuation de pas) | ≥ 31 db/ 1 db step |
CAG intelligent | ALC ≥42dB |
Gagnez en planéité | Typical≤5dB (p-p) |
Facteur de bruit @ max. Gain du système | Typical≤5dB |
V.S.W.R | Typical≤2 |
Retard de groupe | ≤1μs |
Stabilité de fréquence | ≤0.01ppm |
Source de courant | 5V/3A, AC/DC |
Consommation d'énergie | ≤16W |
Impédance | 50 ohm |
I/O port | SMA-Femelle |
Dimensions | 153 mm×246 mm×36 mm/ 6 in×9.7 in ×1.4 inch |
Poids du rehausseur | ≤1.76 lbs/0.8 KG |
Poids du kit de surpression | 3 KG |
Température de fonctionnement | -10ºC~+55ºC |
Température de stockage | -10ºC~+80ºC |
Humidité relative | 5% – 95% |
Pression barométrique | 55 kPa -106 kPa |
État de l'environnement | IP40 |
Avis
Il n’y a pas encore d’avis.