Français
Italiano
Español
Deutsch
ENJOY high quality signal
Egsm signal booster Hi10-EGSM is a smart device that will improve the way you make and receive calls. Combining an innovative auto setup system with a beautiful modern design it will perfectly fit into your home or office.
Obtain mobile signal reception you deserve and stay always reachable!
*Check that you’re able to pick up at least 2-3 bars outside your home/office, so that the HiBoost system could deliver strong signal inside it. The device’s coverage area also depends on design features of your building.
HIBOOST SMART FUNCTIONS
All HiBoost devices are enabled with smart auto set up and self-oscillation detection, so that you bars get boostered in the best way and your network stays protected.
The booster optimizes its performance according to the outdoor signal strength in your area. If the signal is too strong, the power of signal amplification automatically gets down. This completely avoids the interference with your operator’s network and saves the booster from overload.
Self-oscillation can occur when the booster and antenna are installed too close to each other. The booster automatically detects the problem and reduces booster gain to fix the problem.
OFFICIALLY CERTIFIED PRODUCT
HiBoost company and repeaters passed the international and EU certification for a full compliance with quality, health and safety standards (CE RED 2014/53/EU, RoHS, ISO 9001:2023)
1. The outdoor antenna picks up the signal from the nearest cell tower and sends it to the booster.
2. The booster amplifies or literally repeats the cell signal and transmits it to the indoor antenna.
3. The indoor antenna spreads the enhanced the signal throughout the desired area.
4. This is the moment! Your mobile phone receives a strong signal and you enjoy seamless calls and data!
TECH SPECS
| Working Bands | 900 MHz |
|---|---|
| UL Frequency Range | 880-915 |
| DL Frequency Range | 925-960 |
| Supported Standards | EGSM |
| V.S.W.R | Typical≤2 |
| Maximum Gain | Uplink 60 dB, Downlink 63 dB |
| Max. Output Power | 10 dBm |
| MGC (Step Attenuation) | ≥ 31 db/ 1 db step |
| Intelligent AGC | ALC ≥42dB |
| Gain Flatness | Typical≤5dB (p-p) |
| Noise Figure @ Max. System Gain | Typical≤5dB |
| Group Delay | ≤1μs |
| Frequency Stability | ≤0.01ppm |
| Power Supply | Input AC 100~240 V, 50/60 Hz, Output DC 5V/3A |
| Power Consumption | ≤5W |
| Impedance | 50 ohm |
| LCD Display | Frequency, Gain, Output Power, ALC, ISO indicators |
| I/O port | N-Female |
| Dimensions | 120*155*34 mm/ 4.7*6.1*1.3 inch |
| Booster Weight | 0.7KG/ ≤1.5 lbs |
| Booster Kit Weight | 3.75 KG |
| Operating Temperature | -10ºC~+55ºC |
| Storage Temperature | -10ºC~+80ºC |
| Relative Humidity | 5% – 95% |
| Barometric Pressure | 55 kPa -106 kPa |
| Environment Condition | IP40 |
Reviews
There are no reviews yet.