Français
Italiano
Español
Deutsch
Hi13-ED
POWERFUL NETWORK PROTECTION
HiBoost repeaters guarantee overall network protection even in the hardest signal reception conditions. It’s easy thanks to smart auto set up software that all our devices are enabled with.
AUTOMATIC GAIN CONTROL (AGC)
The booster optimizes its performance according to the outdoor signal strength in your area. If the signal is too strong, the power of signal amplification automatically gets down. This completely avoids the interference with your operator’s network and saves the booster from overload.
SELF-OSCILLATION DETECTION
Self-oscillation can occur when the booster and antenna are installed too close to each other. The booster automatically detects the problem and reduces booster gain to fix the problem.
WHAT STANDARD KIT INCLUDES
Every HiBoost solution goes in a full kit with all the installation components you may need. HiBoost Hi13-ED standard kit includes:
- mobile signal booster
- outdoor panel antenna
- whip antenna
- 50ft (15.2 m) HiBoost 200 cable
- 12V/ 3A, AC/DC power supply
- Power cord with European standard plug
EXTEND YOUR COVERAGE
No problem to customize a boosting solution according to your needs. Add an extra indoor panel or omni antenna (view Optional Kits) to your device and double coverage easily.
Standard Kit with whip antenna
Coverage up to 300 sq.m.
Standard Kit + 1 Panel/Omni Kit
Coverage up to 500 sq.m.
1. The outdoor antenna picks up the signal from the nearest cell tower and sends it to the booster.
2. The booster amplifies or literally repeats the signal and transmits it to the indoor antenna.
3. The indoor antenna spreads the enhanced the signal throughout the desired area.
4. This is the moment! Your mobile phone receives a strong signal and you enjoy seamless calls and data!
FULLY CERTIFIED PRODUCT
Quality proved by the compliance with the international and EU health and safety regulations (CE RED 2014/53/EU, RoHS, ISO 9001:2015)
TECH SPECS
| Working Bands | 900, 1800 MHz |
|---|---|
| UL Frequency Range | 880-915/ 1710-1785 MHz |
| DL Frequency Range | 925-960/ 1805-1880 MHz |
| Supported Standards | EGSM + DCS/LTE |
| V.S.W.R | Typical≤2 |
| Maximum Gain | 65 db |
| MGC (Step Attenuation) | ≥ 31 db/ 1 db step |
| Intelligent AGC | ALC ≥42dB |
| Gain Flatness | Typical≤5dB (p-p) |
| Noise Figure @ Max. System Gain | Typical≤5dB |
| Group Delay | ≤1μs |
| Frequency Stability | ≤0.01ppm |
| Power Supply | Input AC 90~240 V, 50/60 Hz, Output DC 12V/3A |
| Power Consumption | 10W |
| Impedance | 50 ohm |
| LCD Display | Frequency, Gain, Output Power, ALC, ISO indicators |
| I/O port | N-Female |
| Dimensions | 4.7*7.8*1.3 inch/ 120*198*34mm |
| Booster Weight | ≤2.2lbs/ 1KG |
| Booster Kit Weight | 3.6 KG |
| Operating Temperature | -10ºC~+55ºC |
| Storage Temperature | -10ºC~+80ºC |
| Relative Humidity | 5% – 95% |
| Barometric Pressure | 55 kPa -106 kPa |
| Environment Condition | IP40 |
Reviews
There are no reviews yet.